Mobile Barcode Scanner - 2D AndroScan DC9252NP
Model : DC9252NP - 2D Engine (Zebra SE2707)
Q'ty :
** Adopts Zebra SE2707 2D engine
** Plug and Play.
** Simple Operation with touch trigger.
** Support 4"~6" Android phone with OTG function
** Through PU glue & suction cup, DC9252NP can stick on back of smartphone well.
** Supports more than 10K scans/per fully charged.
** Can charge smartphone & scanner batteries at the same time.
DC9252NP- AndroScan 2D Mobile Barcode Scanner for Android smartphone use. )
RIOTEC develops AndroScan mobile barcode scanner which can upgrade Android smartphone to simple data collector. This solution can be applied in Warehouse (inventory management), Retail, Logistic, Ticket Checker. This way can not only raise the working efficiency/productivity, but also save hardware cost for enterprise.
** Adopts Zebra SE2707 2D engine
** Plug and Play.
** Simple Operation with touch trigger.
** Support 4"~6" Android phone with OTG function
** Through PU glue & suction cup, DC9252NP can stick on back of smartphone well.
** With Li-Ion battery 900mAH inside, DC9252NP supports more than 10K scans/per fully charged.
** Can charge smartphone & scanner batteries at the same time.
Options:
1. Interface: USB HID or USB-Serial interface
2. Li-Ion battery: DC9252NP (with Li-Ion battery); DC9252NN (without battery)
3. Cable: micro USB cable or type-C cable
Specifications : |
||||
Model Name |
DC9252NP |
DC9252NN |
||
Engine |
|
ZEBRA SE2707 2D Engine |
||
Performance Characteristics |
||||
˙ |
Aiming LED |
610 nm LED |
||
˙ |
Illumination Element |
|
1 Hyper Red 660 nm LED |
|
˙ |
Depth of field |
1D (20 mil Code 39 ):495 mm |
||
˙ |
Sensor |
CMOS (640×400 pixels) |
||
˙ |
Best resolution |
1D (5 mil):Code 39 |
||
˙ |
Print contrast |
≥ 20% |
||
˙ |
Reading angle |
Tilt: 360° / Pitch ±60° / Skew ±60° |
||
˙ |
Charge |
Micro USB port |
||
˙ |
Interface |
USB HID, USB Serial |
||
˙ |
Cable supported |
Micro USB cable or Type-C cable |
||
˙ |
Symbologies |
UPC-A, UPC-E, UPC-E1, EAN-8, EAN-13, ISBN,Code 128, |
||
˙ |
Scan Holder |
with H92P (with battery) |
with H92N (without battery) |
|
Electrical Characteristics |
||||
˙ |
Input voltage |
5 V/DC ± 5% |
||
˙ |
Current - operating |
340 mA |
||
Physical Characteristics |
||||
˙ |
Dimension (L * W * H) |
125 X 52.5 X 32.5 mm |
||
˙ |
Color of housing |
Black |
||
˙ |
Weight |
82 g ± 5 g |
60 g ± 5 g |
|
Environment |
||||
˙ |
Temperature-operation |
0°C to 50°C |
||
˙ |
Temperature-storage |
-10°C to 60°C |
||
˙ |
Humidity-operation |
5% to 95% relative humidity, non-condensing |
||
Decode Zone (DOF is measured at the office under 600 lux and by Standard barcode. There are +/- 10 mm Torrence. DOF may be also impacted by barcode quality and environmental conditions. ) |
||||
˙ |
5 mil Code 39 |
|
54 ~ 162 mm |
|
˙ |
5 mil Code 128 |
|
63 ~ 127 mm |
|
˙ |
20 mil Code 39 |
|
50 ~ 495 mm |
|
˙ |
100% UPCA |
|
50 ~ 317 mm |
|
˙ |
6.6 mil PDF417 |
|
63 ~ 160 mm |
|
˙ |
10 mil PDF417 |
|
45 ~ 228 mm |
|
˙ |
20 mil Data Matrix |
|
38 ~ 343 mm |
|
˙ |
20 mil QR Code |
|
38 ~ 279 mm |